HPDE.io

DE 2 Vector Electric Field Instrument (VEFI) DC Electric Field X and Y components, Spacecraft, SC, coordinates, PT0.5S Data

(2023). DE 2 Vector Electric Field Instrument (VEFI) DC Electric Field X and Y components, Spacecraft, SC, coordinates, PT0.5S Data [Data set]. NASA Space Physics Data Facility. https://doi.org/10.48322/0s61-a111 (CiteAs link). Accessed on .

ResourceID
spase://NASA/NumericalData/DE2/VEFI/DC/CDF/PT0.5S

Description

The Dynamics Explorer 2, DE 2, Vector Electric Field Instrument, VEFI, used flight-proven double-probe techniques with 20-m baselines to obtain measurements of DC electric fields. This electric field investigation had the following objectives:

    1. Obtain accurate and comprehensive triaxial DC electric field measurements at ionospheric altitudes in order to refine the basic spatial patterns
    1. Define the large-scale time history of these patterns
    1. Study the small-scale temporal and spatial variations within the overall patterns
    1. Study the degree to which and in what region the electric field projects to the equatorial plane
    1. Obtain measurements of extreme low frequency, ELF, and lower frequency irregular structures
    1. Perform numerous correlative studies

The VEFI instrument consisted of six cylindrical elements 11 m long and 28 mm in diameter. Each antenna was insulated from the plasma except for the outer 2 m. The baseline, or distance between the midpoints of these 2-m active elements, was 20 m. The antennas were interlocked along the edges to prevent oscillation and to increase their rigidity against drag forces. The antenna pair perpendicular to the orbit plane did not deploy. The basic electronic system was very similar in concept to those used on IMP-8 and ISEE 1, but modified for a three-axis measurement on a nonspinning spacecraft. At the core of the system were the high-impedance 1.0E12 ohm preamplifiers whose outputs were accurately subtracted and digitized at 14-bit analog to digital, A/D, conversion for sensitivity to about 0.1 µV/m to maintain high resolution, for subsequent removal of the cross-product of the spacecraft velocity, Vsc, and magnetic field, B, vectors in data processing. This provided the basic DC measurement. Other circuitry was used to aid in interpreting the DC data and to measure rapid variations in the signals detected by the antennas. The planned DC electric field range was i±1 V/m, the planned resolution was 0.1 mV/m, and the variational electric field was measured from 4 Hz to 1024 Hz. The DC electric field was measured at 16 samples/s. The variational electric field was measured from 1 µV/m to 10 mV/m root mean square, RMS. Additional details are found in N.C. Maynard et al., Space Sci. Instrum., 5(4), 523, 1981.

View XML | View JSON | Edit

Details

Version:2.6.0

NumericalData

ResourceID
spase://NASA/NumericalData/DE2/VEFI/DC/CDF/PT0.5S
ResourceHeader
ResourceName
DE 2 Vector Electric Field Instrument (VEFI) DC Electric Field X and Y components, Spacecraft, SC, coordinates, PT0.5S Data
DOI
https://doi.org/10.48322/0s61-a111
ReleaseDate
2024-02-22 12:34:56.789
RevisionHistory
RevisionEvent
ReleaseDate
2021-04-27 15:38:11
Note
Only known prior ReleaseDate of the metadata
RevisionEvent
ReleaseDate
2023-07-30 12:34:56.789
Note
Added DOI and PublicationInfo minted by LFB, Metadata versioned up to SPASE 2.6.0, reviewed by LFB 20230727
RevisionEvent
ReleaseDate
2024-02-22 12:34:56.789
Note
Corrected TemporalDescription TimeSpan StartDate and StopDate information, Edited ResourceHeader Description to conform with SPASE text normalization and mark-up conventions, LFB 20240222
Description

The Dynamics Explorer 2, DE 2, Vector Electric Field Instrument, VEFI, used flight-proven double-probe techniques with 20-m baselines to obtain measurements of DC electric fields. This electric field investigation had the following objectives:

    1. Obtain accurate and comprehensive triaxial DC electric field measurements at ionospheric altitudes in order to refine the basic spatial patterns
    1. Define the large-scale time history of these patterns
    1. Study the small-scale temporal and spatial variations within the overall patterns
    1. Study the degree to which and in what region the electric field projects to the equatorial plane
    1. Obtain measurements of extreme low frequency, ELF, and lower frequency irregular structures
    1. Perform numerous correlative studies

The VEFI instrument consisted of six cylindrical elements 11 m long and 28 mm in diameter. Each antenna was insulated from the plasma except for the outer 2 m. The baseline, or distance between the midpoints of these 2-m active elements, was 20 m. The antennas were interlocked along the edges to prevent oscillation and to increase their rigidity against drag forces. The antenna pair perpendicular to the orbit plane did not deploy. The basic electronic system was very similar in concept to those used on IMP-8 and ISEE 1, but modified for a three-axis measurement on a nonspinning spacecraft. At the core of the system were the high-impedance 1.0E12 ohm preamplifiers whose outputs were accurately subtracted and digitized at 14-bit analog to digital, A/D, conversion for sensitivity to about 0.1 µV/m to maintain high resolution, for subsequent removal of the cross-product of the spacecraft velocity, Vsc, and magnetic field, B, vectors in data processing. This provided the basic DC measurement. Other circuitry was used to aid in interpreting the DC data and to measure rapid variations in the signals detected by the antennas. The planned DC electric field range was i±1 V/m, the planned resolution was 0.1 mV/m, and the variational electric field was measured from 4 Hz to 1024 Hz. The DC electric field was measured at 16 samples/s. The variational electric field was measured from 1 µV/m to 10 mV/m root mean square, RMS. Additional details are found in N.C. Maynard et al., Space Sci. Instrum., 5(4), 523, 1981.

Acknowledgement
Please acknowledge the Principal Investigator N.C. Maynard for use of the Data
PublicationInfo
Authors
Maynard, Nelson, C.
PublicationDate
2023-01-01 00:00:00
PublishedBy
NASA Space Physics Data Facility
Contacts
RolePersonStartDateStopDateNote
1.PrincipalInvestigatorspase://SMWG/Person/Nelson.C.Maynard
2.MetadataContactspase://SMWG/Person/Robert.M.Candey
3.MetadataContactspase://SMWG/Person/Lee.Frost.Bargatze
InformationURL
Name
Dynamics Explorer 2, DE 2, Vector Electric Field Instrument, VEFI, data readme text file, NASA GSFC
URL
Description

Dynamics Explorer 2, DE 2, Vector Electric Field Instrument, VEFI, data readme text file, hosted by NASA GSFC

Language
en
InformationURL
Name
Dynamics Explorer 2, DE 2, Vector Electric Field Instrument, VEFI, instrument and data description, NASA GSFC
URL
Description

Dynamics Explorer 2, DE 2, Vector Electric Field Instrument, VEFI, instrument and data description, hosted by NASA GSFC

Language
en
InformationURL
Name
OMNIWeb FTP Browser access to Dynamics Explorer 2 Magnetic and Electric Field ASCII data, NASA GSFC
URL
Description

OMNIWeb FTP Browser access to Dynamics Explorer 2 Magnetic and Electric Field ASCII data including plot, listing, and output file services, hosted by NASA GSFC

Language
en
InformationURL
Name
NSSDC Master Catalog, Dynamics Explorer 2, VEFI instrument
URL
Description

General information concerning the Dynamics Explorer 2, Vector Electric Field Instrument, VEFI, instrument

Language
en
PriorIDs
spase://VSPO/NumericalData/DE2/VEFI/DC/CDF/PT0.5S
AccessInformation
RepositoryID
Availability
Online
AccessRights
Open
AccessURL
Name
FTPS from SPDF (not with most browsers)
URL
Description

Access to Data in CDF Format via ftp from SPDF

AccessURL
Name
HTTPS from SPDF
URL
Description

Access to Data in CDF Format via http from SPDF

AccessURL
Name
CDAWeb
URL
ProductKey
DE2_DCA500MS_VEFI
Description

Access to ASCII, CDF, and Plots via NASA/GSFC CDAWeb

Format
CDF
Encoding
None
Acknowledgement
Please acknowledge the Principal Investigator N.C. Maynard. Please acknowledge the Data Providers and CDAWeb when using these Data.
AccessInformation
RepositoryID
Availability
Online
AccessRights
Open
AccessURL
Name
CDAWeb HAPI Server
URL
Style
HAPI
ProductKey
DE2_DCA500MS_VEFI
Description

Web Service to this product using the HAPI interface.

Format
CSV
Acknowledgement
Please acknowledge the Principal Investigator N.C. Maynard. Please acknowledge the Data Providers and CDAWeb when using these Data.
ProcessingLevel
Calibrated
InstrumentIDs
MeasurementType
ElectricField
MeasurementType
Ephemeris
TemporalDescription
TimeSpan
StartDate
1981-08-10 00:00:00.000
StopDate
1983-02-16 23:59:59.999
Cadence
PT0.5S
ObservedRegion
Earth.Magnetosphere
ObservedRegion
Earth.Magnetosphere.Polar
ObservedRegion
Earth.NearSurface
ObservedRegion
Earth.NearSurface.AuroralRegion
ObservedRegion
Earth.NearSurface.EquatorialRegion
ObservedRegion
Earth.NearSurface.Ionosphere
ObservedRegion
Earth.NearSurface.PolarCap
Parameter #1
Name
Epoch Time
ParameterKey
Epoch
Description

Epoch Time Tags, time elapsed since 0 A.D., NSSDC standard-reference time value

Caveats
Average Type: standard This Parameter exhibits an increasing Monotonic Progression.
Cadence
PT0.5S
Units
ms
UnitsConversion
1.0e-3>s
RenderingHints
DisplayType
TimeSeries
ValueFormat
F14.0
ScaleMin
6.2536662219904e+13
ScaleMax
6.2834069019904e+13
ValidMin
15-Sep-1981 00:00:00.000
ValidMax
18-Feb-1991 23:59:59.999
FillValue
31-Dec-9999 23:59:59.999
Support
SupportQuantity
Temporal
Parameter #2
Name
Orbit Number
Set
Time series defined by using: EPOCH
ParameterKey
orbitNumber
Description

Orbit Number

Cadence
PT0.5S
RenderingHints
DisplayType
TimeSeries
AxisLabel
orbit number
ValueFormat
I4
ValidMin
1
ValidMax
8577
FillValue
999
Support
SupportQuantity
Other
Parameter #3
Name
Contact Potential x-component, Spacecraft Cartesian coordinates
Set
Time series defined by using: EPOCH
ParameterKey
ecx
Description

Contact Potential x-component, Ecx, Spacecraft, SC, Cartesian coordinates

Cadence
PT0.5S
Units
mV/m
UnitsConversion
1.0e-3>V/m
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
AxisLabel
Contact pot. Ecx
ValueFormat
F6.2
ValidMin
-10.0
ValidMax
10.0
FillValue
999.99
Field
Qualifier
Scalar
FieldQuantity
Potential
Parameter #4
Name
Contact Potential y-component, Spacecraft Cartesian coordinates
Set
Time series defined by using: EPOCH
ParameterKey
ecy
Description

Contact Potential y-component, Ecy, Spacecraft, SC, Cartesian coordinates

Cadence
PT0.5S
Units
mV/m
UnitsConversion
1.0e-3>V/m
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
AxisLabel
Contact pot. Ecy
ValueFormat
F6.2
ValidMin
-10.0
ValidMax
10.0
FillValue
999.99
Field
Qualifier
Scalar
FieldQuantity
Potential
Parameter #5
Name
Contact Potential z-component, Spacecraft Cartesian coordinates
Set
Time series defined by using: EPOCH
ParameterKey
ecz
Description

Contact Potential z-component, Ecz, Spacecraft, SC, Cartesian coordinates

Cadence
PT0.5S
Units
mV/m
UnitsConversion
1.0e-3>V/m
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
AxisLabel
Contact pot. Ecz
ValueFormat
F6.2
ValidMin
-10.0
ValidMax
10.0
FillValue
999.99
Field
Qualifier
Scalar
FieldQuantity
Potential
Parameter #6
Name
Electric Field x-component, Spacecraft Cartesian coordinates
Set
Time series defined by using: EPOCH
ParameterKey
ex
Description

Electric Field x-component, Ex, Spacecraft, SC, Cartesian coordinates

Cadence
PT0.5S
Units
mV/m
UnitsConversion
1.0e-3>V/m
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
AxisLabel
Ex
ValueFormat
F7.2
ValidMin
-999.99
ValidMax
9999.98
FillValue
9999.99
Field
Qualifier
Scalar
FieldQuantity
Electric
Parameter #7
Name
Electric Field y-component, Spacecraft Cartesian coordinates
Set
Time series defined by using: EPOCH
ParameterKey
ey
Description

Electric Field x-component, Ey, Spacecraft, SC, Cartesian coordinates

Cadence
PT0.5S
Units
mV/m
UnitsConversion
1.0e-3>V/m
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
AxisLabel
Ey
ValueFormat
F7.2
ValidMin
-999.99
ValidMax
9999.98
FillValue
9999.99
Field
Qualifier
Scalar
FieldQuantity
Electric
Parameter #8
Name
Integrated Potential x-component, Spacecraft Cartesian coordinates
Set
Time series defined by using: EPOCH
ParameterKey
potentialX
Description

Integrated Potential x-component, Ecx, Spacecraft, SC, Cartesian coordinates

Cadence
PT0.5S
Units
kV
UnitsConversion
1.0e3>V
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
AxisLabel
Integrated Potential X
ValueFormat
F7.2
ValidMin
-999.99
ValidMax
9999.98
FillValue
9999.99
Field
Qualifier
Scalar
FieldQuantity
Potential
Parameter #9
Name
Electric Field x-component, unadjusted, Spacecraft Cartesian coordinates
Set
Time series defined by using: EPOCH
ParameterKey
ex_nonadj
Description

Electric Field x-component, Ex, unadjusted, Spacecraft, SC, Cartesian coordinates

Cadence
PT0.5S
Units
mV/m
UnitsConversion
1.0e-3>V/m
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
AxisLabel
Ex not adj
ValueFormat
F7.2
ValidMin
-999.99
ValidMax
9999.98
FillValue
9999.99
Field
Qualifier
Scalar
FieldQuantity
Electric
Parameter #10
Name
Electric Field y-component, unadjusted, Spacecraft Cartesian coordinates
Set
Time series defined by using: EPOCH
ParameterKey
ey_nonadj
Description

Electric Field x-component, Ey, unadjusted, Spacecraft, SC, Cartesian coordinates

Cadence
PT0.5S
Units
mV/m
UnitsConversion
1.0e-3>V/m
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
AxisLabel
Ey non adj
ValueFormat
F7.2
ValidMin
-999.99
ValidMax
9999.98
FillValue
9999.99
Field
Qualifier
Scalar
FieldQuantity
Electric
Parameter #11
Name
Integrated Potential x-component, unadjusted, Spacecraft Cartesian coordinates
Set
Time series defined by using: EPOCH
ParameterKey
potentialX_nonadj
Description

Integrated Potential x-component, Ecx, unadjusted, Spacecraft, SC, Cartesian coordinates

Cadence
PT0.5S
Units
kV
UnitsConversion
1.0e3>V
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
AxisLabel
Integrated Potential X non adj
ValueFormat
F7.2
ValidMin
-999.99
ValidMax
9999.98
FillValue
9999.99
Field
Qualifier
Scalar
FieldQuantity
Potential
Parameter #12
Name
Spacecraft Position, Altitude
Set
Time series defined by using: EPOCH
ParameterKey
alt
Description

Spacecraft Position, Altitude

Cadence
PT0.5S
Units
km
UnitsConversion
1.0e3>m
RenderingHints
DisplayType
TimeSeries
AxisLabel
Altitude
ValueFormat
F7.2
ValidMin
0.0
ValidMax
10000.0
FillValue
9999.99
Support
Qualifier
Magnitude
Qualifier
Scalar
SupportQuantity
Positional
Parameter #13
Name
Spacecraft Position, Latitude, Geographic spherical coordinates
Set
Time series defined by using: EPOCH
ParameterKey
glat
Description

Spacecraft Position, Latitude, Geographic, GEO, spherical coordinates

Cadence
PT0.5S
Units
°
UnitsConversion
0.0174532925>rad
CoordinateSystem
CoordinateRepresentation
Spherical
CoordinateSystemName
GEO
RenderingHints
DisplayType
TimeSeries
AxisLabel
Geog Latitude
ValueFormat
F7.2
ValidMin
-90.0
ValidMax
90.0
FillValue
9999.99
Support
Qualifier
DirectionAngle.ElevationAngle
SupportQuantity
Positional
Parameter #14
Name
Spacecraft Position, Longitude, Geographic spherical coordinates
Set
Time series defined by using: EPOCH
ParameterKey
glon
Description

Spacecraft Position, Longitude, Geographic, GEO, spherical coordinates

Cadence
PT0.5S
Units
°
UnitsConversion
0.0174532925>rad
CoordinateSystem
CoordinateRepresentation
Spherical
CoordinateSystemName
GEO
RenderingHints
DisplayType
TimeSeries
AxisLabel
Geog Longitude
ValueFormat
F7.2
ValidMin
-180.0
ValidMax
180.0
FillValue
9999.99
Support
Qualifier
DirectionAngle.AzimuthAngle
SupportQuantity
Positional
Parameter #15
Name
Spacecraft Position, Magnetic Local Time
Set
Time series defined by using: EPOCH
ParameterKey
mlt
Description

Spacecraft Position, Magnetic Local Time, MLT

Cadence
PT0.5S
Units
h
UnitsConversion
3600>s
CoordinateSystem
CoordinateRepresentation
Spherical
CoordinateSystemName
MAG
RenderingHints
DisplayType
TimeSeries
AxisLabel
MLT
ValueFormat
F7.2
ValidMin
0.0
ValidMax
24.0
FillValue
9999.99
Support
Qualifier
DirectionAngle.AzimuthAngle
SupportQuantity
Positional
Parameter #16
Name
Spacecraft Position, Invariant Latitude
Set
Time series defined by using: EPOCH
ParameterKey
ilat
Description

Spacecraft Position, Invariant Latitude

Cadence
PT0.5S
Units
°
UnitsConversion
0.0174532925>rad
CoordinateSystem
CoordinateRepresentation
Spherical
CoordinateSystemName
MAG
RenderingHints
DisplayType
TimeSeries
AxisLabel
Inv Lat
ValueFormat
F7.2
ValidMin
-90.0
ValidMax
90.0
FillValue
9999.99
Support
Qualifier
DirectionAngle.ElevationAngle
SupportQuantity
Positional