HPDE.io

PSP Solar Wind Electrons Alphas and Protons (SWEAP) SPC Ion Number Density, Velocity, and Thermal Speed Momemts and Fits, Level 3 (L3), 0.2185 s Data

(2020). PSP Solar Wind Electrons Alphas and Protons (SWEAP) SPC Ion Number Density, Velocity, and Thermal Speed Momemts and Fits, Level 3 (L3), 0.2185 s Data [Data set]. NASA Space Physics Data Facility. https://doi.org/10.48322/49we-tr31 (CiteAs link). Accessed on .

ResourceID
spase://NASA/NumericalData/ParkerSolarProbe/SWEAP/SPC/Level3/SolarWindMomentsFits/PT0.2185S

Description

SPC Level 3 Ion Data

File Naming Format: psp_swp_spc_l3i_YYYYMMDD_v01.cdf

This data product contains derived measurements of ion properties in the solar wind, including those for density, temperature, and velocity. These are determined both by a direct computation of the velocity moments of the reduced distribution function and by attempting to fit the primary peak in the ion I(V) curve with a Maxwellian model. These measurements correspond one to one with spectra in the psp_swp_spc_l2i file for the same date. It may be convenient for some applications to cross-reference the two. For example, the corresponding l3i file contains ephemeris and data quality flag information that may be useful for an investigator who is concerned only with l2i type measurements.

Conditions that impact measurement quality are documented in the DQF variable, which contains a 32 element flag array for each measurement time. Each element of the array is reserved to signify a specific condition. These conditions are described in the DQF_FLAGNAMES variable. In this version, for example, DQF_FLAGNAMES.DAT[23] is set to "spacecraft maneuver". If measurement "i" was made during a spacecraft maneuver, it is thus flagged with DQF.DAT[23,i] = 1.

In Version 01, measurements are not provided, i.e. variables are set to fill, during spacecraft maneuvers, under conditions of low signal-to-noise, and during certain observed transients. Such conditions are rare during encounters, but increasingly frequent in interplanetary cruise. These conditions are documented in the DQF variable. Remarks are also provided in the "SPC Reduced Data Quality Periods" table. In Version 01, the solar wind alpha particle component is not measured. Thus, variables are set equal to fill values.

SPC Encounter 1 Remarks

Data quality is very good for the duration of the encounter. The solar wind flow was within the optimal field of view for the SPC instrument for nearly the entire encounter. See the data flags for specific exceptions. As with all encounters, signal-to-noise is higher during ingress than egress, which is reflected in the typically smaller uncertainties and less frequent "primary peak low signal" flag events.

SPC Cruise Phase Remarks

Measurements recorded during cruise phase are not all transmitted to Earth. The typical return is one spectrum out of every 32.

SPC Encounter 2 Remarks

Due to an erroneous setting in the operating mode for this encounter, ion full scan spectra and certain spectra immediately following ion full scans are of reduced quality. In the affected full scan spectra, the energy steps over an initial portion of the measurement spectra have zero width, i.e. the Level 2 ion variables MV_LO.DAT = MV_HI.DAT, and the corresponding measurements are purely noise. In some cases, this results in a poor determination of the proton "primary peak" energy, which renders additional subsequent full scans that follow subject to the same incompleteness. In other cases, the energy range for the subsequent "ion peak tracking mode" scan is not ideal. The affected Level 3 ion measurements have been flagged with DQF.DAT[22]=1, which stands for "energy ranging/peak tracking error" and/or set to fill. The operating mode has been revised such that future encounters will not be so affected.

Parker Solar Probe SWEAP Rules of the Road

As part of the development of collaboration with the broader Heliophysics community, the mission has drafted a "Rules of the Road" to govern how PSP instrument data are to be used.

    1. Users should consult with the PI to discuss the appropriate use of instrument data or model results and to ensure that the users are accessing the most recently available versions of the data and of the analysis routines. Instrument team Science Operations Centers, SOCs, and/or Virtual Observatories, VOs, should facilitate this process serving as the contact point between PI and users in most cases.
    1. Users should heed the caveats of investigators to the interpretations and limitations of data or model results. Investigators supplying data or models may insist that such caveats be published. Data and model version numbers should also be specified.
    1. Browse products, Quicklook, and Planning data are not intended for science analysis or publication and should not be used for those purposes without consent of the PI.
    1. Users should acknowledge the sources of data used in all publications, presentations, and reports: "We acknowledge the NASA Parker Solar Probe Mission and the SWEAP team led by J. Kasper for use of data.".
    1. Users are encouraged to provide the PI a copy of each manuscript that uses the PI data prior to submission of that manuscript for consideration of publication. On publication, the citation should be transmitted to the PI and any other providers of data.

View XML | View JSON | Edit

Details

Version:2.3.2

NumericalData

ResourceID
spase://NASA/NumericalData/ParkerSolarProbe/SWEAP/SPC/Level3/SolarWindMomentsFits/PT0.2185S
ResourceHeader
ResourceName
PSP Solar Wind Electrons Alphas and Protons (SWEAP) SPC Ion Number Density, Velocity, and Thermal Speed Momemts and Fits, Level 3 (L3), 0.2185 s Data
DOI
https://doi.org/10.48322/49we-tr31
ReleaseDate
2021-04-27 15:38:11Z
Description

SPC Level 3 Ion Data

File Naming Format: psp_swp_spc_l3i_YYYYMMDD_v01.cdf

This data product contains derived measurements of ion properties in the solar wind, including those for density, temperature, and velocity. These are determined both by a direct computation of the velocity moments of the reduced distribution function and by attempting to fit the primary peak in the ion I(V) curve with a Maxwellian model. These measurements correspond one to one with spectra in the psp_swp_spc_l2i file for the same date. It may be convenient for some applications to cross-reference the two. For example, the corresponding l3i file contains ephemeris and data quality flag information that may be useful for an investigator who is concerned only with l2i type measurements.

Conditions that impact measurement quality are documented in the DQF variable, which contains a 32 element flag array for each measurement time. Each element of the array is reserved to signify a specific condition. These conditions are described in the DQF_FLAGNAMES variable. In this version, for example, DQF_FLAGNAMES.DAT[23] is set to "spacecraft maneuver". If measurement "i" was made during a spacecraft maneuver, it is thus flagged with DQF.DAT[23,i] = 1.

In Version 01, measurements are not provided, i.e. variables are set to fill, during spacecraft maneuvers, under conditions of low signal-to-noise, and during certain observed transients. Such conditions are rare during encounters, but increasingly frequent in interplanetary cruise. These conditions are documented in the DQF variable. Remarks are also provided in the "SPC Reduced Data Quality Periods" table. In Version 01, the solar wind alpha particle component is not measured. Thus, variables are set equal to fill values.

SPC Encounter 1 Remarks

Data quality is very good for the duration of the encounter. The solar wind flow was within the optimal field of view for the SPC instrument for nearly the entire encounter. See the data flags for specific exceptions. As with all encounters, signal-to-noise is higher during ingress than egress, which is reflected in the typically smaller uncertainties and less frequent "primary peak low signal" flag events.

SPC Cruise Phase Remarks

Measurements recorded during cruise phase are not all transmitted to Earth. The typical return is one spectrum out of every 32.

SPC Encounter 2 Remarks

Due to an erroneous setting in the operating mode for this encounter, ion full scan spectra and certain spectra immediately following ion full scans are of reduced quality. In the affected full scan spectra, the energy steps over an initial portion of the measurement spectra have zero width, i.e. the Level 2 ion variables MV_LO.DAT = MV_HI.DAT, and the corresponding measurements are purely noise. In some cases, this results in a poor determination of the proton "primary peak" energy, which renders additional subsequent full scans that follow subject to the same incompleteness. In other cases, the energy range for the subsequent "ion peak tracking mode" scan is not ideal. The affected Level 3 ion measurements have been flagged with DQF.DAT[22]=1, which stands for "energy ranging/peak tracking error" and/or set to fill. The operating mode has been revised such that future encounters will not be so affected.

Parker Solar Probe SWEAP Rules of the Road

As part of the development of collaboration with the broader Heliophysics community, the mission has drafted a "Rules of the Road" to govern how PSP instrument data are to be used.

    1. Users should consult with the PI to discuss the appropriate use of instrument data or model results and to ensure that the users are accessing the most recently available versions of the data and of the analysis routines. Instrument team Science Operations Centers, SOCs, and/or Virtual Observatories, VOs, should facilitate this process serving as the contact point between PI and users in most cases.
    1. Users should heed the caveats of investigators to the interpretations and limitations of data or model results. Investigators supplying data or models may insist that such caveats be published. Data and model version numbers should also be specified.
    1. Browse products, Quicklook, and Planning data are not intended for science analysis or publication and should not be used for those purposes without consent of the PI.
    1. Users should acknowledge the sources of data used in all publications, presentations, and reports: "We acknowledge the NASA Parker Solar Probe Mission and the SWEAP team led by J. Kasper for use of data.".
    1. Users are encouraged to provide the PI a copy of each manuscript that uses the PI data prior to submission of that manuscript for consideration of publication. On publication, the citation should be transmitted to the PI and any other providers of data.
Acknowledgement
Please acknowledge the Principal Investigator J.C. Kasper for use of the Data. NASA open data policy applies. Consultation with the instrument team is strongly recommended.
PublicationInfo
Authors
Kasper, Justin C.; Stevens, M. L.; Case, A. W.; Korreck, K. E.
PublicationDate
2020-01-01 00:00:00
PublishedBy
NASA Space Physics Data Facility
Contacts
RolePersonStartDateStopDateNote
1.PrincipalInvestigatorspase://SMWG/Person/Justin.C.Kasper
2.MetadataContactspase://SMWG/Person/Robert.M.Candey
3.MetadataContactspase://SMWG/Person/Lee.Frost.Bargatze
InformationURL
Name
PSP SWEAP Instrument Suite, Space Science Review Publication
URL
Description

Parker Solar Probe, PSP, SWEAP Instrument Suite Description: Kasper, J.C., Abiad, R., Austin, G. et al., Solar Wind Electrons Alphas and Protons (SWEAP) Investigation: Design of the Solar Wind and Coronal Plasma Instrument Suite for Solar Probe Plus, Space Scii. Rev., 204, 131–186 (2016)

InformationURL
Name
PSP SWEAP home page, SAO
URL
Description

Parker Solar Probe, PSP, SWEAP home page, Smithsonian Astrophysical Observatory

InformationURL
Name
PSP SWEAP Data Access web site, SAO
URL
Description

Parker Solar Probe, PSP, SWEAP Data Access web site, Smithsonian Astrophysical Observatory

PriorIDs
spase://VSPO/NumericalData/ParkerSolarProbe/SWEAP/SPC/Level3/SolarWindMomentsFits/PT0.2185S
AccessInformation
RepositoryID
Availability
Online
AccessRights
Open
AccessURL
Name
FTPS from SPDF (not with most browsers)
URL
Description

Access to Data in CDF Format via ftp from SPDF

AccessURL
Name
HTTPS from SPDF
URL
Description

Access to Data in CDF Format via http from SPDF

AccessURL
Name
CDAWeb
URL
ProductKey
PSP_SWP_SPC_L3I
Description

Access to ASCII, CDF, and Plots via NASA/GSFC CDAWeb

Format
CDF
Encoding
None
Acknowledgement
Please acknowledge the Principal Investigator J.C. Kasper. Please acknowledge the Data Providers and CDAWeb when using these Data.
AccessInformation
RepositoryID
Availability
Online
AccessRights
Open
AccessURL
Name
CDAWeb HAPI Server
URL
Style
HAPI
ProductKey
PSP_SWP_SPC_L3I
Description

Web Service to this product using the HAPI interface.

Format
CSV
Acknowledgement
Please acknowledge the Principal Investigator J.C. Kasper. Please acknowledge the Data Providers and CDAWeb when using these Data.
ProcessingLevel
Calibrated
InstrumentIDs
MeasurementType
Ephemeris
MeasurementType
ThermalPlasma
TemporalDescription
TimeSpan
StartDate
2018-10-06 00:00:00.000
RelativeStopDate
-P6M
Cadence
PT0.2185S
ObservedRegion
Heliosphere
ObservedRegion
Heliosphere.Inner
ObservedRegion
Heliosphere.NearEarth
ObservedRegion
Sun.Corona
Parameter #1
Name
Epoch Time, TT2000, Midpoint of Integration
ParameterKey
Epoch
Description

Epoch Time Tags, TT2000, Nanoseconds since J2000 at Midpoint of the Integration

Caveats
Warning: the Epoch time typically has an irregular cadence owing to frequent changes in the operating mode. TT2000 is measured in nanoseconds from J2000 with leap seconds included. Please refer to CDF TT2000 documentation with regards to this convention. This time corresponds to the first measurement of the spectrum. In accordance with SPDF standards, this epoch is interpreted a CDF_TT2000 time. It is acknowledged here that this epoch is not strictly equal to "terrestrial time" as it is defined in the CDF_TT2000 documentation nor is the calendar date interpreted by CDF_T2000 operation performed on this epoch strictly equal to Coordinated Universal Time, UTC This Parameter exhibits an increasing Monotonic Progression.
Cadence
PT0.2185S
Units
ns
UnitsConversion
1.0e-9>s
RenderingHints
AxisLabel
Epoch
ScaleType
LinearScale
ValidMin
1990-01-01T00:00:00.000000000
ValidMax
2029-12-31T23:59:58.999000000
FillValue
9999-12-31T23:59:59.999999999
Support
SupportQuantity
Temporal
Parameter #2
Name
Solar Probe Cup Data Quality Flag
Set
Time Series defined by using: EPOCH
ParameterKey
DQF
Description

Solar Probe Cup, SPC, Data Quality Flag: an array of SPC data quality indicators

Caveats
Genaral Flag Values: 0=Good/Nominal/Exceptional conditions absent/etc., >1=Bad/Problematic/Exceptional conditions present/etc., -1=Status not determined ("don't know"), <-1=Status does not matter ("don't care").
Cadence
PT0.2185S
RenderingHints
AxisLabel
DQF
ValueFormat
I3
ScaleType
LinearScale
Structure
Size
32
Element
Name
Element 1
Index
1
RenderingHints
AxisLabel
1
Element
Name
Element 2
Index
2
RenderingHints
AxisLabel
2
Element
Name
Element 3
Index
3
RenderingHints
AxisLabel
3
Element
Name
Element 4
Index
4
RenderingHints
AxisLabel
4
Element
Name
Element 5
Index
5
RenderingHints
AxisLabel
5
Element
Name
Element 6
Index
6
RenderingHints
AxisLabel
6
Element
Name
Element 7
Index
7
RenderingHints
AxisLabel
7
Element
Name
Element 8
Index
8
RenderingHints
AxisLabel
8
Element
Name
Element 9
Index
9
RenderingHints
AxisLabel
9
Element
Name
Element 10
Index
10
RenderingHints
AxisLabel
10
Element
Name
Element 11
Index
11
RenderingHints
AxisLabel
11
Element
Name
Element 12
Index
12
RenderingHints
AxisLabel
12
Element
Name
Element 13
Index
13
RenderingHints
AxisLabel
13
Element
Name
Element 14
Index
14
RenderingHints
AxisLabel
14
Element
Name
Element 15
Index
15
RenderingHints
AxisLabel
15
Element
Name
Element 16
Index
16
RenderingHints
AxisLabel
16
Element
Name
Element 17
Index
17
RenderingHints
AxisLabel
17
Element
Name
Element 18
Index
18
RenderingHints
AxisLabel
18
Element
Name
Element 19
Index
19
RenderingHints
AxisLabel
19
Element
Name
Element 20
Index
20
RenderingHints
AxisLabel
20
Element
Name
Element 21
Index
21
RenderingHints
AxisLabel
21
Element
Name
Element 22
Index
22
RenderingHints
AxisLabel
22
Element
Name
Element 23
Index
23
RenderingHints
AxisLabel
23
Element
Name
Element 24
Index
24
RenderingHints
AxisLabel
24
Element
Name
Element 25
Index
25
RenderingHints
AxisLabel
25
Element
Name
Element 26
Index
26
RenderingHints
AxisLabel
26
Element
Name
Element 27
Index
27
RenderingHints
AxisLabel
27
Element
Name
Element 28
Index
28
RenderingHints
AxisLabel
28
Element
Name
Element 29
Index
29
RenderingHints
AxisLabel
29
Element
Name
Element 30
Index
30
RenderingHints
AxisLabel
30
Element
Name
Element 31
Index
31
RenderingHints
AxisLabel
31
Element
Name
Element 32
Index
32
RenderingHints
AxisLabel
32
ValidMin
-2
ValidMax
127
FillValue
-128
Support
Qualifier
Array
SupportQuantity
Velocity
Parameter #3
Name
Solar Probe Cup General Quality Flag
Set
Time Series defined by using: EPOCH
ParameterKey
general_flag
Description

Solar Probe Cup, SCP, General Quality Flag: This flag documents all exceptional conditions that can affect normal data analysis of SPC observations. All flag values equal to zero signify good data with no exceptional conditions present.

Caveats
Genaral Flag Values: 0=Good/Nominal/Exceptional conditions absent/etc., >1=Bad/Problematic/Exceptional conditions present/etc., -1=Status not determined ("don't know"), <-1=Status does not matter ("don't care"). The General Flag can be found in all of the l3i files.
Cadence
PT0.2185S
RenderingHints
AxisLabel
general flag
ValueFormat
I3
ScaleType
LinearScale
ValidMin
-2
ValidMax
127
FillValue
-128
Support
Qualifier
Scalar
SupportQuantity
Velocity
Parameter #4
Name
Proton Velocity moment estimate, in the Spacecraft frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_SC_gd
Description

Proton, p, Velocity, V estimate, from the first moment of the reduced distribution function, in the Spacecraft, Spacecraft frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp_moment_SC, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_xSC
Index
1
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
1
Element
Name
vp_moment_ySC
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp_moment_zSC
Index
3
ValidMin
-2000.0
ValidMax
0.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #5
Name
Proton Velocity moment estimate, upper uncertainty, in the Spacecraft frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_SC_deltahigh_gd
Description

Proton, p, Velocity, V estimate, upper uncertainty, from the first moment of the reduced distribution function, in the Spacecraft, Spacecraft frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp_moment_SC_deltahigh, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_xSC_deltahigh
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_moment_ySC_deltahigh
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_moment_zSC_deltahigh
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #6
Name
Proton Velocity moment estimate, lower uncertainty, in the Spacecraft frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_SC_deltalow_gd
Description

Proton, p, Velocity, V estimate, lower uncertainty, from the first moment of the reduced distribution function, in the Spacecraft, Spacecraft frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp_moment_SC_deltalow, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_xSC_deltalow
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_moment_ySC_deltalow
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_moment_zSC_deltalow
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #7
Name
Proton Velocity moment estimate, in the Radial-Tangential-Normal frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_RTN_gd
Description

Proton, p, Velocity, V estimate, from the first moment of the reduced distribution function, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp_moment_RTN, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_R
Index
1
ValidMin
0.0
ValidMax
2000.0
RenderingHints
AxisLabel
1
Element
Name
vp_moment_T
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp_moment_N
Index
3
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #8
Name
Proton Velocity moment estimate, upper uncertainty, in the Radial-Tangential-Normal frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_RTN_deltahigh_gd
Description

Proton, p, Velocity, V estimate, upper uncertainty, from the first moment of the reduced distribution function, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp_moment_RTN_deltahigh, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_R_deltahigh
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_moment_T_deltahigh
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_moment_N_deltahigh
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #9
Name
Proton Velocity moment estimate, lower uncertainty, in the Radial-Tangential-Normal frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_RTN_deltalow_gd
Description

Proton, p, Velocity, V estimate, lower uncertainty, from the first moment of the reduced distribution function, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp_moment_RTN_deltalow, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_R_deltalow
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_moment_T_deltalow
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_moment_N_deltalow
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #10
Name
Proton Number Density moment estimate, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np_moment_gd
Description

Proton, p, Number Density, n estimate, from the zeroth moment of the reduced distribution function, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: np_moment, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np_moment
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.01
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #11
Name
Proton Number Density moment estimate, upper uncertainty, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np_moment_deltahigh_gd
Description

Proton, p, Number Density, n estimate, upper uncertainty, from the zeroth moment of the reduced distribution function, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: np_moment_deltahigh, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np_moment_deltahigh
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #12
Name
Proton Number Density moment estimate, lower uncertainty, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np_moment_deltalow_gd
Description

Proton, p, Number Density, n estimate, lower uncertainty, from the zeroth moment of the reduced distribution function, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: np_moment_deltalow, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np_moment_deltalow
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #13
Name
Proton most probable Radial Thermal Speed moment estimate, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp_moment_gd
Description

Proton, p, most probable Radial Thermal Speed, Vth estimate, from the second moment of the reduced distribution function, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: wp_moment, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp_moment
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #14
Name
Proton most probable Radial Thermal Speed moment estimate, upper uncertainty, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp_moment_deltahigh_gd
Description

Proton, p, most probable Radial Thermal Speed, Vth estimate, upper uncertainty, from the second moment of the reduced distribution function, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: wp_moment_deltahigh, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp_moment_deltahigh
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #15
Name
Proton most probable Radial Thermal Speed moment estimate, lower uncertainty, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp_moment_deltalow_gd
Description

Proton, p, most probable Radial Thermal Speed, Vth estimate, lower uncertainty, from the second moment of the reduced distribution function, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: wp_moment_deltalow, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp_moment_deltalow
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #16
Name
Primary Proton Population Velocity estimate, in the Spacecraft frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp1_fit_SC_gd
Description

Primary Proton Population, p, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Spacecraft, Spacecraft frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp1_fit_SC, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp1_fit_xSC
Index
1
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
1
Element
Name
vp1_fit_ySC
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp1_fit_zSC
Index
3
ValidMin
-2000.0
ValidMax
0.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #17
Name
Primary Proton Population Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp1_fit_SC_uncertainty_gd
Description

Primary Proton Population, p, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp1_fit_SC_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp1_fit_xSC_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp1_fit_ySC_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp1_fit_zSC_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #18
Name
Primary Proton Population Velocity estimate, in the Radial-Tangential-Normal frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp1_fit_RTN_gd
Description

Primary Proton Population, p, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp1_fit_RTN, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp1_fit_R
Index
1
ValidMin
0.0
ValidMax
2000.0
RenderingHints
AxisLabel
1
Element
Name
vp1_fit_T
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp1_fit_N
Index
3
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #19
Name
Primary Proton Population Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp1_fit_RTN_uncertainty_gd
Description

Primary Proton Population, p, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp1_fit_RTN_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp1_fit_R_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp1_fit_T_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp1_fit_N_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #20
Name
Primary Proton Population Number Density estimate, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np1_fit_gd
Description

Primary Proton Population, p, Number Density, n estimate, from 1-dimensional Maxwellian fitting, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: np1_fit, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np1_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.01
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #21
Name
Primary Proton Population Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np1_fit_uncertainty_gd
Description

Primary Proton Population, p, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: np1_fit_uncertainty, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np1_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #22
Name
Primary Proton Population most probable Radial Thermal Speed estimate, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp1_fit_gd
Description

Primary Proton Population, p, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: wp1_fit, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp1_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #23
Name
Primary Proton Population most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp1_fit_uncertainty_gd
Description

Primary Proton Population, p, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: wp1_fit_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp1_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #24
Name
Proton Velocity estimate, in the Spacecraft frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_fit_SC_gd
Description

Proton, p, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Spacecraft, Spacecraft frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp_fit_SC, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_fit_xSC
Index
1
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
1
Element
Name
vp_fit_ySC
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp_fit_zSC
Index
3
ValidMin
-2000.0
ValidMax
0.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #25
Name
Proton Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_fit_SC_uncertainty_gd
Description

Proton, p, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp_fit_SC_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_fit_xSC_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_fit_ySC_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_fit_zSC_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #26
Name
Proton Velocity estimate, in the Radial-Tangential-Normal frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_fit_RTN_gd
Description

Proton, p, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp_fit_RTN, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_fit_R
Index
1
ValidMin
0.0
ValidMax
2000.0
RenderingHints
AxisLabel
1
Element
Name
vp_fit_T
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp_fit_N
Index
3
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #27
Name
Proton Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_fit_RTN_uncertainty_gd
Description

Proton, p, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: vp_fit_RTN_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_fit_R_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_fit_T_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_fit_N_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #28
Name
Proton Number Density estimate, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np_fit_gd
Description

Proton, p, Number Density, n estimate, from 1-dimensional Maxwellian fitting, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: np_fit, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.01
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #29
Name
Proton Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np_fit_uncertainty_gd
Description

Proton, p, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: np_fit_uncertainty, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #30
Name
Proton most probable Radial Thermal Speed estimate, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp_fit_gd
Description

Proton, p, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: wp_fit, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #31
Name
Proton most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp_fit_uncertainty_gd
Description

Proton, p, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: wp_fit_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #32
Name
Alpha Particle Velocity estimate, in the Spacecraft frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
va_fit_SC_gd
Description

Alpha Particle, He++, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Spacecraft, Spacecraft frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: va_fit_SC, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
va_fit_xSC
Index
1
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
1
Element
Name
va_fit_ySC
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
va_fit_zSC
Index
3
ValidMin
-2000.0
ValidMax
0.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #33
Name
Alpha Particle Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
va_fit_SC_uncertainty_gd
Description

Alpha Particle, He++, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: va_fit_SC_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
va_fit_xSC_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
va_fit_ySC_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
va_fit_zSC_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #34
Name
Alpha Particle Velocity estimate, in the Radial-Tangential-Normal frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
va_fit_RTN_gd
Description

Alpha Particle, He++, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: va_fit_RTN, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
va_fit_R
Index
1
ValidMin
0.0
ValidMax
2000.0
RenderingHints
AxisLabel
1
Element
Name
va_fit_T
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
va_fit_N
Index
3
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #35
Name
Alpha Particle Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
va_fit_RTN_uncertainty_gd
Description

Alpha Particle, He++, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: va_fit_RTN_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
va_fit_R_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
va_fit_T_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
va_fit_N_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #36
Name
Alpha Particle Number Density estimate, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
na_fit_gd
Description

Alpha Particle, He++, Number Density, n estimate, from 1-dimensional Maxwellian fitting, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: na_fit, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
na_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.01
ValidMax
10000.0
FillValue
-1.0e+31
Particle
Qualifier
Scalar
ParticleQuantity
NumberDensity
Parameter #37
Name
Alpha Particle Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
na_fit_uncertainty_gd
Description

Alpha Particle, He++, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: na_fit_uncertainty, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
na_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
Qualifier
Scalar
ParticleQuantity
NumberDensity
Parameter #38
Name
Alpha Particle most probable Radial Thermal Speed estimate, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wa_fit_gd
Description

Alpha Particle, He++, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: wa_fit, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wa_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
Parameter #39
Name
Alpha Particle most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wa_fit_uncertainty_gd
Description

Alpha Particle, He++, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: wa_fit_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wa_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
Parameter #40
Name
Population 3 Velocity estimate, in the Spacecraft frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
v3_fit_SC_gd
Description

Population 3, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Spacecraft, Spacecraft frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: v3_fit_SC, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
v3_fit_xSC
Index
1
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
1
Element
Name
v3_fit_ySC
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
v3_fit_zSC
Index
3
ValidMin
-2000.0
ValidMax
0.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #41
Name
Population 3 Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
v3_fit_SC_uncertainty_gd
Description

Population 3, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: v3_fit_SC_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
v3_fit_xSC_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
v3_fit_ySC_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
v3_fit_zSC_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #42
Name
Population 3 Velocity estimate, in the Radial-Tangential-Normal frame, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
v3_fit_RTN_gd
Description

Population 3, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: v3_fit_RTN, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
v3_fit_R
Index
1
ValidMin
0.0
ValidMax
2000.0
RenderingHints
AxisLabel
1
Element
Name
v3_fit_T
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
v3_fit_N
Index
3
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #43
Name
Population 3 Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
v3_fit_RTN_uncertainty_gd
Description

Population 3, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: v3_fit_RTN_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
v3_fit_R_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
v3_fit_T_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
v3_fit_N_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #44
Name
Population 3 Number Density estimate, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
n3_fit_gd
Description

Population 3, Number Density, n estimate, from 1-dimensional Maxwellian fitting, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: n3_fit, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
n3_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.01
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Scalar
ParticleQuantity
NumberDensity
Parameter #45
Name
Population 3 Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
n3_fit_uncertainty_gd
Description

Population 3, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: n3_fit_uncertainty, general_flag.
Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
n3_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Scalar
ParticleQuantity
NumberDensity
Parameter #46
Name
Population 3 most probable Radial Thermal Speed estimate, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
w3_fit_gd
Description

Population 3, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: w3_fit, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
w3_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
Parameter #47
Name
Population 3 most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
w3_fit_uncertainty_gd
Description

Population 3, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: w3_fit_uncertainty, general_flag.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
w3_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
Parameter #48
Name
Population 3 Identifier, good Qs
Set
Time Series defined by using: EPOCH
ParameterKey
pop3_mtoq_gd
Description

Population 3 Identifier, the third population fit, that is, in addition to primary Proton and Alpha peaks, only good data qualities

Caveats
This parameter is virtual. It is calculated by calling the function APPLY_FILTER_FLAG with the following input parameters: pop3_mtoq, general_flag.
Cadence
PT0.2185S
Units
u/e
RenderingHints
AxisLabel
m-to-q
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Scalar
ParticleQuantity
Mass
Parameter #49
Name
Spacecraft Position, Heliocentric Inertial coordinates, cartesian
Set
Time Series defined by using: EPOCH
ParameterKey
sc_pos_HCI
Description

Spacecraft Position, Heliocentric Inertial, HCI, coordinates, cartesian

Caveats
HCI coordinates are also called Ecliptic J2000. The Z-axis is the solar north rotational axis and the X-axis is the solar ascending node on the J2000 ecliptic.
Cadence
PT0.2185S
Units
km
UnitsConversion
1.0e3>m
CoordinateSystem
CoordinateRepresentation
Spherical
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
x_HCI
Index
1
RenderingHints
AxisLabel
1
Element
Name
y_HCI
Index
2
RenderingHints
AxisLabel
2
Element
Name
z_HCI
Index
3
RenderingHints
AxisLabel
3
ValidMin
-3.0e+08
ValidMax
3.0e+08
FillValue
-1.0e+31
Support
Qualifier
Vector
SupportQuantity
Velocity
Parameter #50
Name
Spacecraft Velocity, Heliocentric Inertial coordinates, cartesian
Set
Time Series defined by using: EPOCH
ParameterKey
sc_vel_HCI
Description

Spacecraft Velocity, Heliocentric Inertial, HCI, coordinates, cartesian

Caveats
HCI coordinates are also called Ecliptic J2000. The Z-axis is the solar north rotational axis and the X-axis is the solar ascending node on the J2000 ecliptic.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
CoordinateSystem
CoordinateRepresentation
Spherical
CoordinateSystemName
SC
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
Vx_HCI
Index
1
RenderingHints
AxisLabel
1
Element
Name
Vy_HCI
Index
2
RenderingHints
AxisLabel
2
Element
Name
Vz_HCI
Index
3
RenderingHints
AxisLabel
3
ValidMin
-300.0
ValidMax
300.0
FillValue
-1.0e+31
Support
Qualifier
Vector
SupportQuantity
Velocity
Parameter #51
Name
Spacecraft Position, Latitude, Carrington coordinates, spherical
Set
Time Series defined by using: EPOCH
ParameterKey
carr_latitude
Description

Spacecraft Position, Latitude, Carrington coordinates, spherical

Caveats
Measured from the Solar Solar Equator
Cadence
PT0.2185S
Units
°
UnitsConversion
0.0174532925>rad
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
Carrington
RenderingHints
DisplayType
TimeSeries
AxisLabel
latitude
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
-90.0
ValidMax
90.0
FillValue
-1.0e+31
Support
Qualifier
DirectionAngle.ElevationAngle
Qualifier
Magnitude
SupportQuantity
Positional
Parameter #52
Name
Spacecraft Position, Longitude, Carrington coordinates, spherical
Set
Time Series defined by using: EPOCH
ParameterKey
carr_longitude
Description

Spacecraft Position, Longitude, Carrington coordinates, spherical

Caveats
Measured from the Solar Prime Meridian
Cadence
PT0.2185S
Units
°
UnitsConversion
0.0174532925>rad
CoordinateSystem
CoordinateRepresentation
Cartesian
CoordinateSystemName
Carrington
RenderingHints
DisplayType
TimeSeries
AxisLabel
longitude
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
-180.0
ValidMax
180.0
FillValue
-1.0e+31
Support
Qualifier
DirectionAngle.AzimuthAngle
Qualifier
Magnitude
SupportQuantity
Positional
Parameter #53
Name
Proton Velocity moment estimate, in the Spacecraft frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_SC
Description

Proton, p, Velocity, V estimate, from the first moment of the reduced distribution function, in the Spacecraft, Spacecraft frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_xSC
Index
1
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
1
Element
Name
vp_moment_ySC
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp_moment_zSC
Index
3
ValidMin
-2000.0
ValidMax
0.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #54
Name
Proton Velocity moment estimate, upper uncertainty, in the Spacecraft frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_SC_deltahigh
Description

Proton, p, Velocity, V estimate, upper uncertainty, from the first moment of the reduced distribution function, in the Spacecraft, Spacecraft frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_xSC_deltahigh
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_moment_ySC_deltahigh
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_moment_zSC_deltahigh
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #55
Name
Proton Velocity moment estimate, lower uncertainty, in the Spacecraft frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_SC_deltalow
Description

Proton, p, Velocity, V estimate, lower uncertainty, from the first moment of the reduced distribution function, in the Spacecraft, Spacecraft frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_xSC_deltalow
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_moment_ySC_deltalow
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_moment_zSC_deltalow
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #56
Name
Proton Velocity moment estimate, in the Radial-Tangential-Normal frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_RTN
Description

Proton, p, Velocity, V estimate, from the first moment of the reduced distribution function, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_R
Index
1
ValidMin
0.0
ValidMax
2000.0
RenderingHints
AxisLabel
1
Element
Name
vp_moment_T
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp_moment_N
Index
3
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #57
Name
Proton Velocity moment estimate, upper uncertainty, in the Radial-Tangential-Normal frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_RTN_deltahigh
Description

Proton, p, Velocity, V estimate, upper uncertainty, from the first moment of the reduced distribution function, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_R_deltahigh
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_moment_T_deltahigh
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_moment_N_deltahigh
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #58
Name
Proton Velocity moment estimate, lower uncertainty, in the Radial-Tangential-Normal frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_moment_RTN_deltalow
Description

Proton, p, Velocity, V estimate, lower uncertainty, from the first moment of the reduced distribution function, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_moment_R_deltalow
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_moment_T_deltalow
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_moment_N_deltalow
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #59
Name
Proton Number Density moment estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np_moment
Description

Proton, p, Number Density, n estimate, from the zeroth moment of the reduced distribution function, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np_moment
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.01
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #60
Name
Proton Number Density moment estimate, upper uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np_moment_deltahigh
Description

Proton, p, Number Density, n estimate, upper uncertainty, from the zeroth moment of the reduced distribution function, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np_moment_deltahigh
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #61
Name
Proton Number Density moment estimate, lower uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np_moment_deltalow
Description

Proton, p, Number Density, n estimate, lower uncertainty, from the zeroth moment of the reduced distribution function, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np_moment_deltalow
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #62
Name
Proton most probable Radial Thermal Speed moment estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp_moment
Description

Proton, p, most probable Radial Thermal Speed, Vth estimate, from the second moment of the reduced distribution function, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp_moment
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #63
Name
Proton most probable Radial Thermal Speed moment estimate, upper uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp_moment_deltahigh
Description

Proton, p, most probable Radial Thermal Speed, Vth estimate, upper uncertainty, from the second moment of the reduced distribution function, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp_moment_deltahigh
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #64
Name
Proton most probable Radial Thermal Speed moment estimate, lower uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp_moment_deltalow
Description

Proton, p, most probable Radial Thermal Speed, Vth estimate, lower uncertainty, from the second moment of the reduced distribution function, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp_moment_deltalow
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #65
Name
Primary Proton Population Velocity estimate, in the Spacecraft frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp1_fit_SC
Description

Primary Proton Population, p, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Spacecraft, Spacecraft frame, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp1_fit_xSC
Index
1
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
1
Element
Name
vp1_fit_ySC
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp1_fit_zSC
Index
3
ValidMin
-2000.0
ValidMax
0.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #66
Name
Primary Proton Population Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp1_fit_SC_uncertainty
Description

Primary Proton Population, p, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp1_fit_xSC_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp1_fit_ySC_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp1_fit_zSC_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #67
Name
Primary Proton Population Velocity estimate, in the Radial-Tangential-Normal frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp1_fit_RTN
Description

Primary Proton Population, p, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp1_fit_R
Index
1
ValidMin
0.0
ValidMax
2000.0
RenderingHints
AxisLabel
1
Element
Name
vp1_fit_T
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp1_fit_N
Index
3
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #68
Name
Primary Proton Population Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp1_fit_RTN_uncertainty
Description

Primary Proton Population, p, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp1_fit_R_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp1_fit_T_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp1_fit_N_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #69
Name
Primary Proton Population Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np1_fit
Description

Primary Proton Population, p, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np1_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.01
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #70
Name
Primary Proton Population Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np1_fit_uncertainty
Description

Primary Proton Population, p, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np1_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #71
Name
Primary Proton Population most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp1_fit
Description

Primary Proton Population, p, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp1_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #72
Name
Primary Proton Population most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp1_fit_uncertainty
Description

Primary Proton Population, p, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp1_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #73
Name
Proton Velocity estimate, in the Spacecraft frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_fit_SC
Description

Proton, p, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Spacecraft, Spacecraft frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_fit_xSC
Index
1
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
1
Element
Name
vp_fit_ySC
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp_fit_zSC
Index
3
ValidMin
-2000.0
ValidMax
0.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #74
Name
Proton Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_fit_SC_uncertainty
Description

Proton, p, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_fit_xSC_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_fit_ySC_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_fit_zSC_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #75
Name
Proton Velocity estimate, in the Radial-Tangential-Normal frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_fit_RTN
Description

Proton, p, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_fit_R
Index
1
ValidMin
0.0
ValidMax
2000.0
RenderingHints
AxisLabel
1
Element
Name
vp_fit_T
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
vp_fit_N
Index
3
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #76
Name
Proton Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
vp_fit_RTN_uncertainty
Description

Proton, p, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
vp_fit_R_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
vp_fit_T_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
vp_fit_N_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Vector
ParticleQuantity
Velocity
AtomicNumber
1
Parameter #77
Name
Proton Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np_fit
Description

Proton, p, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.01
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #78
Name
Proton Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
np_fit_uncertainty
Description

Proton, p, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
np_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
NumberDensity
AtomicNumber
1
Parameter #79
Name
Proton most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp_fit
Description

Proton, p, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #80
Name
Proton most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wp_fit_uncertainty
Description

Proton, p, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wp_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
AtomicNumber
1
Parameter #81
Name
Alpha Particle Velocity estimate, in the Spacecraft frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
va_fit_SC
Description

Alpha Particle, He++, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Spacecraft, Spacecraft frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
va_fit_xSC
Index
1
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
1
Element
Name
va_fit_ySC
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
va_fit_zSC
Index
3
ValidMin
-2000.0
ValidMax
0.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #82
Name
Alpha Particle Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
va_fit_SC_uncertainty
Description

Alpha Particle, He++, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
va_fit_xSC_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
va_fit_ySC_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
va_fit_zSC_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #83
Name
Alpha Particle Velocity estimate, in the Radial-Tangential-Normal frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
va_fit_RTN
Description

Alpha Particle, He++, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
va_fit_R
Index
1
ValidMin
0.0
ValidMax
2000.0
RenderingHints
AxisLabel
1
Element
Name
va_fit_T
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
va_fit_N
Index
3
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #84
Name
Alpha Particle Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
va_fit_RTN_uncertainty
Description

Alpha Particle, He++, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
va_fit_R_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
va_fit_T_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
va_fit_N_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #85
Name
Alpha Particle Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
na_fit
Description

Alpha Particle, He++, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
na_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.01
ValidMax
10000.0
FillValue
-1.0e+31
Particle
Qualifier
Scalar
ParticleQuantity
NumberDensity
Parameter #86
Name
Alpha Particle Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
na_fit_uncertainty
Description

Alpha Particle, He++, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
na_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
Qualifier
Scalar
ParticleQuantity
NumberDensity
Parameter #87
Name
Alpha Particle most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wa_fit
Description

Alpha Particle, He++, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wa_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
Parameter #88
Name
Alpha Particle most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
wa_fit_uncertainty
Description

Alpha Particle, He++, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
wa_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
Parameter #89
Name
Population 3 Velocity estimate, in the Spacecraft frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
v3_fit_SC
Description

Population 3, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Spacecraft, Spacecraft frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
v3_fit_xSC
Index
1
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
1
Element
Name
v3_fit_ySC
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
v3_fit_zSC
Index
3
ValidMin
-2000.0
ValidMax
0.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #90
Name
Population 3 Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
v3_fit_SC_uncertainty
Description

Population 3, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
v3_fit_xSC_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
v3_fit_ySC_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
v3_fit_zSC_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #91
Name
Population 3 Velocity estimate, in the Radial-Tangential-Normal frame, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
v3_fit_RTN
Description

Population 3, Velocity, V estimate, from 1-dimensional Maxwellian fitting, in the Radial-Tangential-Normal, Radial-Tangential-Normal frame, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
v3_fit_R
Index
1
ValidMin
0.0
ValidMax
2000.0
RenderingHints
AxisLabel
1
Element
Name
v3_fit_T
Index
2
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
2
Element
Name
v3_fit_N
Index
3
ValidMin
-1000.0
ValidMax
1000.0
RenderingHints
AxisLabel
3
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #92
Name
Population 3 Velocity estimate, uncertainty, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
v3_fit_RTN_uncertainty
Description

Population 3, Velocity, V estimate, one sigma error uncertainty, from 1-dimensional Maxwellian fitting, all data qualities

Caveats
The mission elapsed time string is constructed as met_seconds+':'+met_subseconds_base50000, where: met_seconds is the CCSDS_MET value cast as an integer string with no whitespace and met_subseconds_base50000 is an "I05" format integer string formed by converting the xxx_SUBSEC value to units of 1/50000 second. For example, if the xxx_SUBSEC value is recorded in parts per 65536 o second, the correct procedure would be to round 50000*(xxx_SUBSEC/65536) to the nearest integer and cast a string by using the "I05" format. Here, CCSDS_MET is the mission elapsed time, in seconds, from the PSP Epoch, which is defined to be January 1, 2010, 12:00:00 UTC and xxx_SUBSEC is the elapsed time in fractional seconds since the last tick of MET typically in units of 2^-16 seconds.
Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
ValueFormat
E12.2
ScaleType
LinearScale
Structure
Size
3
Element
Name
v3_fit_R_uncertainty
Index
1
RenderingHints
AxisLabel
1
Element
Name
v3_fit_T_uncertainty
Index
2
RenderingHints
AxisLabel
2
Element
Name
v3_fit_N_uncertainty
Index
3
RenderingHints
AxisLabel
3
ValidMin
0.0
ValidMax
2000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Vector
ParticleQuantity
Velocity
Parameter #93
Name
Population 3 Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
n3_fit
Description

Population 3, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
n3_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.01
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Scalar
ParticleQuantity
NumberDensity
Parameter #94
Name
Population 3 Number Density estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
n3_fit_uncertainty
Description

Population 3, Number Density, n estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
cm^-3
UnitsConversion
1.0e6>m^-3
RenderingHints
DisplayType
TimeSeries
AxisLabel
n3_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Scalar
ParticleQuantity
NumberDensity
Parameter #95
Name
Population 3 most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
w3_fit
Description

Population 3, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
w3_fit
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
Parameter #96
Name
Population 3 most probable Radial Thermal Speed estimate, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
w3_fit_uncertainty
Description

Population 3, most probable Radial Thermal Speed, Vth estimate, from 1-dimensional Maxwellian fitting, all data qualities

Cadence
PT0.2185S
Units
km/s
UnitsConversion
1.0e3>m/s
RenderingHints
DisplayType
TimeSeries
AxisLabel
w3_fit_uncertainty
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
0.001
ValidMax
10000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Scalar
ParticleQuantity
ThermalSpeed
Parameter #97
Name
Population 3 Identifier, all Qs
Set
Time Series defined by using: EPOCH
ParameterKey
pop3_mtoq
Description

Population 3 Identifier, the third population fit, that is, in addition to primary Proton and Alpha peaks, all data qualities

Caveats
When the n3_fit, w3_fit, and/or v3_fit variables are valid, they indicate tha third ion population has been measured in addition to the primary proton and alpha particle populations. This variable indicates the estimated mass-per-charge for that population, in fundamental units, i.e. protons=1/1=1, alphas=4/2=2, O6=16/6=2.67. Populatio most typically characterize proton shoulder or beam with mass-per-charge equal to one.
Cadence
PT0.2185S
Units
u/e
RenderingHints
AxisLabel
m-to-q
ValueFormat
E12.2
ScaleType
LinearScale
ValidMin
1.0
ValidMax
1000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Scalar
ParticleQuantity
Mass
Parameter #98
Name
Data Quality Flag, Flag Names
ParameterKey
DQF_flagnames
Description

Data Quality Flag: The names of the data quality array fields.

Caveats
The zeroth flag array element is the standardized global quality flag signifying whether the data are suitable for use without caveate. Refer to the Solar Probe Cup, SPC, Science Data Center documentation for descriptions of other elements and value definitions.
Cadence
PT0.2185S
RenderingHints
AxisLabel
none
ValueFormat
A11
Structure
Size
32
ValidMin
UNKNOWN_VALID_MIN
ValidMax
UNKNOWN_VALID_MAX
Support
Qualifier
Array
SupportQuantity
Other