HPDE.io

Wind SMS Suite SupraThermal Ion Composition Spectrometer (SMS/STICS) Ion Moments, Level 2 (L2), 3-minute Data in Magnetosphere

(2023). Wind SMS Suite SupraThermal Ion Composition Spectrometer (SMS/STICS) Ion Moments, Level 2 (L2), 3-minute Data in Magnetosphere [Data set]. NASA Space Physics Data Facility. https://doi.org/10.48322/wnzt-eh29. Accessed on .

Note: Proper references, including those in BibTex or other formats, should include the "Accessed on date" as shown above to identify the version of the resource being cited in a given publication.

ResourceID
spase://NASA/NumericalData/Wind/SMS/STICS/Moments/Level2/Magnetosphere/PT3M

Description

The data include Wind STICS 3-minute density (0th moment) and mean value of the energy distribution (1st moment), together with their statistical errors, for selected ion species using triple coincidence (H+, He+, He2+, C5+, O+, O6+, and Fe10+) and double coincidence (H+, He+, He2+, O+, O6+) measurements in the magnetosphere. For details, see https://spdf.gsfc.nasa.gov/pub/data/wind/documents/wind_stics_lv2_release_notes_revD.pdf.
The Suprathermal Ion Composition Spectrometer (STICS) is a time of flight (TOF) plasma mass spectrometer, capable of identifying mass and mass per charge for incident ions up to 200 keV/e. It uses an electrostatic analyzer to admit ions of a particular energy per charge (E/Q) into the TOF chamber. The E/Q voltage is stepped through 32 values, sitting at each value for approximately 24 sec., to measure ions over the full E/Q range of 6 - 200 keV/e. Ions then pass through a carbon foil and TOF chamber, before finally impacting on a solid-state detector (SSD) for energy measurement. STICS combines these three measurements of E/Q, TOF and residual energy, producing PHA words. This triple-coincidence technique greatly improves the signal to noise ratio in the data. Measurements of E/Q and TOF without residual energy also produce PHA words. These double-coincidence measurements are characterized by better statistics since ions whose energy does not allow them to be registered by the SSD can still be counted in double-coincidence measurements. However, ion identification in double-coincidence measurements are limited to a select number of ions that are well separated in E/Q - TOF space. The STICS instrument provides full 3D velocity distribution functions, through a combination of multiple telescopes and spacecraft spin. The instrument includes 3 separate TOF telescopes that view 3 separate latitude sectors, as shown in Figure 1 (https://spdf.gsfc.nasa.gov/pub/data/wind/documents/wind_stics_lv2_release_notes_revD.pdf). In addition, the WIND spacecraft spins, allowing the 3 telescopes to trace out a nearly 4π steradian viewing area. The longitudinal sectors are shown in Figure 2. The solar direction is in sectors 8-10 while the earthward direction is in sectors 0-2.

View XML | View JSON | Edit

Details

Version:2.6.0

NumericalData

ResourceID
spase://NASA/NumericalData/Wind/SMS/STICS/Moments/Level2/Magnetosphere/PT3M
ResourceHeader
ResourceName
Wind SMS Suite SupraThermal Ion Composition Spectrometer (SMS/STICS) Ion Moments, Level 2 (L2), 3-minute Data in Magnetosphere
DOI
https://doi.org/10.48322/wnzt-eh29
ReleaseDate
2024-03-14 00:00:00
RevisionHistory
RevisionEvent
ReleaseDate
2023-11-01 00:00:00
Note
Draft metadata created by LFB (ADAPT code), final editing by AK
RevisionEvent
ReleaseDate
2024-03-14 00:00:00
Note
Added DOI and PublicationInfo, AK
Description

The data include Wind STICS 3-minute density (0th moment) and mean value of the energy distribution (1st moment), together with their statistical errors, for selected ion species using triple coincidence (H+, He+, He2+, C5+, O+, O6+, and Fe10+) and double coincidence (H+, He+, He2+, O+, O6+) measurements in the magnetosphere. For details, see https://spdf.gsfc.nasa.gov/pub/data/wind/documents/wind_stics_lv2_release_notes_revD.pdf.
The Suprathermal Ion Composition Spectrometer (STICS) is a time of flight (TOF) plasma mass spectrometer, capable of identifying mass and mass per charge for incident ions up to 200 keV/e. It uses an electrostatic analyzer to admit ions of a particular energy per charge (E/Q) into the TOF chamber. The E/Q voltage is stepped through 32 values, sitting at each value for approximately 24 sec., to measure ions over the full E/Q range of 6 - 200 keV/e. Ions then pass through a carbon foil and TOF chamber, before finally impacting on a solid-state detector (SSD) for energy measurement. STICS combines these three measurements of E/Q, TOF and residual energy, producing PHA words. This triple-coincidence technique greatly improves the signal to noise ratio in the data. Measurements of E/Q and TOF without residual energy also produce PHA words. These double-coincidence measurements are characterized by better statistics since ions whose energy does not allow them to be registered by the SSD can still be counted in double-coincidence measurements. However, ion identification in double-coincidence measurements are limited to a select number of ions that are well separated in E/Q - TOF space. The STICS instrument provides full 3D velocity distribution functions, through a combination of multiple telescopes and spacecraft spin. The instrument includes 3 separate TOF telescopes that view 3 separate latitude sectors, as shown in Figure 1 (https://spdf.gsfc.nasa.gov/pub/data/wind/documents/wind_stics_lv2_release_notes_revD.pdf). In addition, the WIND spacecraft spins, allowing the 3 telescopes to trace out a nearly 4π steradian viewing area. The longitudinal sectors are shown in Figure 2. The solar direction is in sectors 8-10 while the earthward direction is in sectors 0-2.

Acknowledgement
Please acknowledge the Principal Investigator S. T. Lepri for use of the Data
PublicationInfo
Authors
Lepri, Susan T.; Raines, Jim M.; Ploof, Keeling C.; Tracy, Patrick J.; Gruesbeck, Jacob R.; Eddy, Tyler J.; Thomas, Jonathan W.
PublicationDate
2023-01-01 00:00:00
PublishedBy
NASA Space Physics Data Facility
Contacts
RolePersonStartDateStopDateNote
1.PrincipalInvestigatorspase://SMWG/Person/Susan.T.Lepri
2.MetadataContactspase://SMWG/Person/Robert.M.Candey
3.MetadataContactspase://SMWG/Person/Andriy.Koval
InformationURL
Name
Home Page
URL
Description

Historic Wind SMS

Language
en
InformationURL
AccessInformation
RepositoryID
Availability
Online
AccessRights
Open
AccessURL
Name
FTPS from SPDF (not with most browsers)
URL
Description

Access to Data in CDF Format via ftps from SPDF

AccessURL
Name
HTTPS from SPDF
URL
Description

Access to Data in CDF Format via https from SPDF

AccessURL
Name
CDAWeb
URL
ProductKey
WI_L2_3MIN_SMS-STICS-NVT-MAGNETOSPHERE
Description

Access to ASCII, CDF, and Plots via NASA/GSFC CDAWeb

Format
CDF
Encoding
None
Acknowledgement
Please acknowledge the Principal Investigator S. T. Lepri. Please acknowledge the Data Providers and CDAWeb when using these Data.
AccessInformation
RepositoryID
Availability
Online
AccessRights
Open
AccessURL
Name
CDAWeb HAPI Server
URL
Style
HAPI
ProductKey
WI_L2_3MIN_SMS-STICS-NVT-MAGNETOSPHERE
Description

Web Service to this product using the HAPI interface.

Format
CSV
ProcessingLevel
Calibrated
ProviderProcessingLevel
Level 2
InstrumentIDs
MeasurementType
IonComposition
TemporalDescription
TimeSpan
StartDate
1995-08-01 00:05:19.000
StopDate
2004-04-28 23:55:32.000
Cadence
PT3M
ObservedRegion
Earth.Magnetosphere
Parameter #1
Name
Time
ParameterKey
Epoch
Description

Time start of avg interval

Caveats
This Parameter exhibits an increasing Monotonic Progression
Units
ms
UnitsConversion
1.0e-3>s
RenderingHints
AxisLabel
Epoch
ScaleMin
6.2924580219904e+13
ScaleMax
6.3745034619904e+13
ValidMin
01-Jan-1994 00:00:00.000
ValidMax
01-Jan-2020 00:00:00.000
FillValue
31-Dec-9999 23:59:59.999
Support
SupportQuantity
Temporal
Parameter #2
Name
Density H+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_hplus
Description

Density H+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density H+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #3
Name
Density error H+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_hplus
Description

--- Error in the density value assuming Poisson statistics H+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error H+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #4
Name
Average energy H+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_hplus
Description

Average energy H+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy H+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #5
Name
energy error H+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_hplus
Description

--- Error average energy value H+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error H+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #6
Name
Density He+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_heplus
Description

Density He+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density He+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #7
Name
Density error He+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_heplus
Description

--- Error in the density value assuming Poisson statistics He+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error He+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #8
Name
Average energy He+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_heplus
Description

Average energy He+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy He+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #9
Name
energy error He+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_heplus
Description

--- Error average energy value He+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error He+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #10
Name
Density He2+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_he2plus
Description

Density He2+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density He2+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
AlphaParticle
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #11
Name
Density error He2+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_he2plus
Description

--- Error in the density value assuming Poisson statistics He2+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error He2+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
AlphaParticle
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #12
Name
Average energy He2+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_he2plus
Description

Average energy He2+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy He2+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
AlphaParticle
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #13
Name
energy error He2+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_he2plus
Description

--- Error average energy value He2+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error He2+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
AlphaParticle
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #14
Name
Density O+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_oplus
Description

Density O+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density O+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #15
Name
Density error O+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_oplus
Description

--- Error in the density value assuming Poisson statistics O+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error O+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #16
Name
Average energy O+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_oplus
Description

Average energy O+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy O+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #17
Name
energy error O+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_oplus
Description

--- Error average energy value O+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error O+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #18
Name
Density O6+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_o6plus
Description

Density O6+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density O6+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #19
Name
Density error O6+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_o6plus
Description

--- Error in the density value assuming Poisson statistics O6+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error O6+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #20
Name
Average energy O6+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_o6plus
Description

Average energy O6+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy O6+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #21
Name
energy error O6+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_o6plus
Description

--- Error average energy value O6+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error O6+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #22
Name
Density C5+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_c5plus
Description

Density C5+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density C5+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #23
Name
Density error C5+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_c5plus
Description

--- Error in the density value assuming Poisson statistics C5+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error C5+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #24
Name
Average energy C5+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_c5plus
Description

Average energy C5+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy C5+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #25
Name
energy error C5+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_c5plus
Description

--- Error average energy value C5+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error C5+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #26
Name
Density Fe10+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_fe10plus
Description

Density Fe10+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density Fe10+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #27
Name
Density error Fe10+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_fe10plus
Description

--- Error in the density value assuming Poisson statistics Fe10+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error Fe10+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #28
Name
Average energy Fe10+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_fe10plus
Description

Average energy Fe10+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy Fe10+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #29
Name
energy error Fe10+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_fe10plus
Description

--- Error average energy value Fe10+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error Fe10+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #30
Name
Density C+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_cplus
Description

Density C+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density C+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #31
Name
Density error C+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_cplus
Description

--- Error in the density value assuming Poisson statistics C+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error C+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #32
Name
Average energy C+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_cplus
Description

Average energy C+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy C+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #33
Name
energy error C+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_cplus
Description

--- Error average energy value C+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error C+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #34
Name
Density N+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_nplus
Description

Density N+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density N+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #35
Name
Density error N+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_nplus
Description

--- Error in the density value assuming Poisson statistics N+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error N+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #36
Name
Average energy N+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_nplus
Description

Average energy N+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy N+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #37
Name
energy error N+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_nplus
Description

--- Error average energy value N+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error N+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #38
Name
Density O2+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_o2plus
Description

Density O2+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density O2+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #39
Name
Density error O2+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_o2plus
Description

--- Error in the density value assuming Poisson statistics O2+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error O2+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #40
Name
Average energy O2+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_o2plus
Description

Average energy O2+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy O2+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #41
Name
energy error O2+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_o2plus
Description

--- Error average energy value O2+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error O2+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #42
Name
Density C4+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_c4plus
Description

Density C4+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density C4+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #43
Name
Density error C4+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_c4plus
Description

--- Error in the density value assuming Poisson statistics C4+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error C4+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #44
Name
Average energy C4+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_c4plus
Description

Average energy C4+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy C4+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #45
Name
energy error C4+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_c4plus
Description

--- Error average energy value C4+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error C4+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #46
Name
Density C6+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_c6plus
Description

Density C6+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density C6+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #47
Name
Density error C6+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_c6plus
Description

--- Error in the density value assuming Poisson statistics C6+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error C6+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #48
Name
Average energy C6+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_c6plus
Description

Average energy C6+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy C6+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #49
Name
energy error C6+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_c6plus
Description

--- Error average energy value C6+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error C6+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #50
Name
Density O7+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_o7plus
Description

Density O7+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density O7+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #51
Name
Density error O7+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_o7plus
Description

--- Error in the density value assuming Poisson statistics O7+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error O7+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #52
Name
Average energy O7+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_o7plus
Description

Average energy O7+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy O7+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #53
Name
energy error O7+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_o7plus
Description

--- Error average energy value O7+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error O7+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #54
Name
Density O8+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_o8plus
Description

Density O8+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density O8+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #55
Name
Density error O8+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_o8plus
Description

--- Error in the density value assuming Poisson statistics O8+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error O8+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #56
Name
Average energy O8+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_o8plus
Description

Average energy O8+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy O8+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #57
Name
energy error O8+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_o8plus
Description

--- Error average energy value O8+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error O8+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #58
Name
Density Fe8+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_fe8plus
Description

Density Fe8+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density Fe8+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #59
Name
Density error Fe8+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_fe8plus
Description

--- Error in the density value assuming Poisson statistics Fe8+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error Fe8+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #60
Name
Average energy Fe8+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_fe8plus
Description

Average energy Fe8+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy Fe8+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #61
Name
energy error Fe8+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_fe8plus
Description

--- Error average energy value Fe8+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error Fe8+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #62
Name
Density Fe9+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_fe9plus
Description

Density Fe9+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density Fe9+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #63
Name
Density error Fe9+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_fe9plus
Description

--- Error in the density value assuming Poisson statistics Fe9+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error Fe9+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #64
Name
Average energy Fe9+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_fe9plus
Description

Average energy Fe9+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy Fe9+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #65
Name
energy error Fe9+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_fe9plus
Description

--- Error average energy value Fe9+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error Fe9+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #66
Name
Density Fe16+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_tc_fe16plus
Description

Density Fe16+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density Fe16+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #67
Name
Density error Fe16+ tc
Set
Time series defined by using: Epoch
ParameterKey
n_err_tc_fe16plus
Description

--- Error in the density value assuming Poisson statistics Fe16+ triple coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error Fe16+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #68
Name
Average energy Fe16+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_tc_fe16plus
Description

Average energy Fe16+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy Fe16+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #69
Name
energy error Fe16+ tc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_tc_fe16plus
Description

--- Error average energy value Fe16+ triple coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error Fe16+ tc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #70
Name
Density H+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_dc_hplus
Description

Density H+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density H+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #71
Name
Density error H+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_err_dc_hplus
Description

--- Error in the density value assuming Poisson statistics H+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error H+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #72
Name
Average energy H+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_dc_hplus
Description

Average energy H+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy H+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #73
Name
energy error H+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_dc_hplus
Description

--- Error average energy value H+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error H+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Proton
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #74
Name
Density He+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_dc_heplus
Description

Density He+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density He+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #75
Name
Density error He+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_err_dc_heplus
Description

--- Error in the density value assuming Poisson statistics He+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error He+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #76
Name
Average energy He+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_dc_heplus
Description

Average energy He+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy He+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #77
Name
energy error He+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_dc_heplus
Description

--- Error average energy value He+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error He+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #78
Name
Density He2+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_dc_he2plus
Description

Density He2+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density He2+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
AlphaParticle
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #79
Name
Density error He2+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_err_dc_he2plus
Description

--- Error in the density value assuming Poisson statistics He2+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error He2+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
AlphaParticle
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #80
Name
Average energy He2+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_dc_he2plus
Description

Average energy He2+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy He2+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
AlphaParticle
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #81
Name
energy error He2+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_dc_he2plus
Description

--- Error average energy value He2+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error He2+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
AlphaParticle
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #82
Name
Density O+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_dc_oplus
Description

Density O+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density O+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #83
Name
Density error O+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_err_dc_oplus
Description

--- Error in the density value assuming Poisson statistics O+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error O+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #84
Name
Average energy O+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_dc_oplus
Description

Average energy O+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy O+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #85
Name
energy error O+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_dc_oplus
Description

--- Error average energy value O+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error O+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #86
Name
Density O6+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_dc_o6plus
Description

Density O6+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density O6+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #87
Name
Density error O6+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_err_dc_o6plus
Description

--- Error in the density value assuming Poisson statistics O6+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error O6+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #88
Name
Average energy O6+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_dc_o6plus
Description

Average energy O6+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy O6+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #89
Name
energy error O6+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_dc_o6plus
Description

--- Error average energy value O6+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error O6+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #90
Name
Density C+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_dc_cplus
Description

Density C+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density C+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
ParticleQuantity
NumberDensity
Parameter #91
Name
Density error C+ dc
Set
Time series defined by using: Epoch
ParameterKey
n_err_dc_cplus
Description

--- Error in the density value assuming Poisson statistics C+ double coincidence

Cadence
PT3M
Units
1/cm^-3
RenderingHints
AxisLabel
Density error C+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
ParticleQuantity
NumberDensity
Parameter #92
Name
Average energy C+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_dc_cplus
Description

Average energy C+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
Average energy C+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Average
ParticleQuantity
Energy
Parameter #93
Name
energy error C+ dc
Set
Time series defined by using: Epoch
ParameterKey
E_ave_err_dc_cplus
Description

--- Error average energy value C+ double coincidence

Cadence
PT3M
Units
keV
RenderingHints
AxisLabel
energy error C+ dc
ValueFormat
E12.4
ScaleType
LogScale
ValidMin
0.0
ValidMax
1.0e+10
FillValue
-1.0e+31
Particle
ParticleType
Ion
Qualifier
Moment
Qualifier
Uncertainty
Qualifier
Average
ParticleQuantity
Energy
Parameter #94
Name
delT
Set
Time series defined by using: Epoch
ParameterKey
delT
Description

delta time

Cadence
PT3M
Units
s
RenderingHints
AxisLabel
delT
ValueFormat
E12.5
ValidMin
0.0
ValidMax
100000.0
FillValue
-1.0e+31
Support
SupportQuantity
Temporal