HPDE.io

LAP

ResourceID
spase://CNES/Instrument/CDPP-AMDA/Rosetta/LAP

Description

The ESA Rosetta mission to comet 67P/Churyumov-Gerasimenko carried a small but
comprehensive set of plasma instruments known as the Rosetta Plasma Consortium (RPC),
monitoring the cometary plasma from arrival in August 2014 to end of mission in September
2016. Among the RPC instruments was the Langmuir probe instrument LAP, with chief
mission to measure:
* Plasma density, ne
* Spacecraft potential, Vsc
* Electron temperature, Te
* Electric field, E
* Ion flow speed, ui
* Photoemission current, Iph
* Wave activity

    The LAP sensors are two spherical probes, 5 cm in diameter, known as LAP1 and LAP2, one 

on each of the two booms protruding a few meters from the s/c body. The primary
parameters actually measured by the instrument is the current flowing to (or the voltage of)
the probes when some bias voltage (or bias current) is applied to it, which are the data
transmitted to ground. From these data the parameters above have been derived, for some
products also with use of data from RPC-MIP. Do not expect all parameters to be available at
any given time.

View XML | View JSON | Edit

Details

Version:2.4.1

Instrument

ResourceID
spase://CNES/Instrument/CDPP-AMDA/Rosetta/LAP
ResourceHeader
ResourceName
LAP
AlternateName
Langmuir Probe
ReleaseDate
2009-05-20 21:10:13Z
Description

The ESA Rosetta mission to comet 67P/Churyumov-Gerasimenko carried a small but
comprehensive set of plasma instruments known as the Rosetta Plasma Consortium (RPC),
monitoring the cometary plasma from arrival in August 2014 to end of mission in September
2016. Among the RPC instruments was the Langmuir probe instrument LAP, with chief
mission to measure:
* Plasma density, ne
* Spacecraft potential, Vsc
* Electron temperature, Te
* Electric field, E
* Ion flow speed, ui
* Photoemission current, Iph
* Wave activity

    The LAP sensors are two spherical probes, 5 cm in diameter, known as LAP1 and LAP2, one 

on each of the two booms protruding a few meters from the s/c body. The primary
parameters actually measured by the instrument is the current flowing to (or the voltage of)
the probes when some bias voltage (or bias current) is applied to it, which are the data
transmitted to ground. From these data the parameters above have been derived, for some
products also with use of data from RPC-MIP. Do not expect all parameters to be available at
any given time.

Contacts
RolePersonStartDateStopDateNote
1.PrincipalInvestigatorspase://CNES/Person/CDPP-AMDA/Anders.Eriksson
InstrumentType
LangmuirProbe
InvestigationName
Langmuir Probe
ObservatoryID